Step-By-Step User Guide
![Blackmagic URSA 12K cinema camera time code input](https://deitymic.com/wp-content/uploads/2022/08/Step-2_Connect-To-TC-Port-1-1240x698.png)
Step #1
First things first, grab a BNC to 3.5 TRS cable. Next, locate the TC input on the rear of the camera and plug it in.
Step #2
Really quickly, confirm your frame rate, in this case I’m using “23.98.“
On your TC-1, scroll over to the frame rate section and match it to the camera.
![Deity TC-1 time code generator frame rate setting](https://deitymic.com/wp-content/uploads/2022/08/Step-4_Match-Frame-Rate-1-1240x698.png)
![Deity TC-1 time code generator out type setting. L-Out](https://deitymic.com/wp-content/uploads/2022/08/Step-5_Out-Type-Setting-1-1240x698.png)
Step #3
Next, scroll over to the out type section and select “L-Out.”
You’re Connected!
Your Blackmagic URSA 12K will automatically recognize this signal and is ready to be synced with the rest of your set!
If you need help syncing your Deity TC-1 to your other Deity TC-1 timecode generators, here is a User Guide!
![Blackmagic URSA 12K cinema camera with Deity TC-1 time code generator](https://deitymic.com/wp-content/uploads/2022/08/Step-6_Mount-Shoot-1-1240x698.png)
Connect all your devices to your phone or laptop via Sidus Audio™️. With our app, you can control your device’s settings, monitor their status, and sync all your units at once. Learn More
For the user guide to Sidus Audio™️ Click Here
Drop a comment down below if you have any cameras or mixers you’d like to see tutorials for!