Step-By-Step User Guide
![Deity THEOS UHF Antennas](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_00_12_11.Still077-1240x698.jpg)
US vs Global Version
If you purchased a global Theos unit it will come with uncut antennas, while the US version will come with precut antennas.
If you purchase additional antennas, you will need to cut them according to the following guide.
Antenna Length
The length of the antenna dictates which frequencies it can send and receive.
Luckily getting antennas with a custom length is easy using Deity’s UHF-RA and UHF-TA.
![Deity THEOS UHF Antennas](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_00_20_18.Still078-1240x698.jpg)
![Deity UHF-RA and UHF-TA reference chart](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_00_31_09.Still079-1240x698.jpg)
Reference Chart
When you open the box you’ll see a double-sided length reference chart for the antennas, with UHF-RA on one side and UHF-TA on the other.
The charts are 1:1 so place the antenna onto its respective chart, aligning the connector with the line drawing.
The bottom of both should be congruent. Make note of which frequency band you need and find its corresponding cut mark on the chart.
Using the Chart
The charts are 1:1 so place the antenna onto its respective chart, aligning the connector with the line drawing.
The bottom of both should be congruent. Make note of which frequency band you need and find its corresponding cut mark on the chart.
![Deity UHF-RA and UHF-TA reference chart](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_00_42_03.Still085-1240x698.jpg)
![Deity UHF-RA and UHF-TA reference chart](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_00_58_01.Still081-1240x698.jpg)
Example
For example, if you’d like a transmitter antenna to work with 733MHz, according to the chart you will need to cut the antenna at T4.
The receiver equivalent to cut will be R4.
Mark your cut
Use a silver Sharpie or other marker to denote where the cut should be made.
![Deity UHF-RA and UHF-TA reference chart. Marking your cut](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_01_10_21.Still082-1240x698.jpg)
![Wire cutters for UHF antennas](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_01_19_10.Still083-1240x698.jpg)
Proper cutting tool
Note, this is heavy gauge antenna wire so household scissors will not cut it, you’ll need a proper set of wire cutters.
Antenna Caps
Once cut, use one of the included antenna caps to protect and label the cable. What color cap to use is listed on the chart.
For the T4 length selected, you need a yellow cap.
![Deity UHF-RA and UHF-TA](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_01_24_08.Still084-1240x698.jpg)
![Deity Theos frequency page](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_01_40_07.Still086-1240x698.jpg)
Find your Frequency
On the Deity website, we list the frequency ranges for over 60 countries.
Find your local range and follow the directions on the reference chart for its corresponding antenna cut length.
You’re Up and Running
With that, your antennas are ready to be attached to your devices.
Be sure to come back and check out our other THEOS tutorials!
![Deity Theos antennas](https://deitymic.com/wp-content/uploads/2023/12/THEOS_Antenna.00_01_53_22.Still087-1240x698.jpg)
Connect all your devices to your phone or laptop via Sidus Audio™️. With our app, you can control your device’s settings, monitor their status, and sync all your units at once. Learn More
For the user guide to Sidus Audio™️ Click Here